2003 Mazda Protege "need bleed cooling system 2" Questions

Ad

...need a new thermostat gasket.The thermostat has a air bleeder nipple that has to be up. When you fill the radiator and you start the vehicle the thermostat will open up when it is warmed and coolant ...

Ad

Question about Mazda Protege

1 Answer

need easy steps (for Dummies) on how to bleed the cooling system. Antifreeze is deadly to animals do not spill. remove radiator cap cold engine. at bottom of rad open valve with piece of hose stuck on

Ad

...need to bleed the coolant system of all the air. theres usually a little screw with a nut somewhere near the highest point of the cooling system. there can also be 2 coolant caps like on the ford ...

...need the the words in the fsm.? have it for engine. the fsm chapter is called, COOLING. chapter 7 ill answer for 4.7L covered on page 13 the key to this is run/cool cycles and repeat until you are ...

Question about Opel Cars & Trucks

1 Answer

...bleed the system without getting air bubbles???? Vauxhall/Opel range usually had a single pin coolant temp sensor in the top of the intake manifold and removing it while filling the cooling system ...

Need schematics or diagram of engine dont know where to start ! Cooling System Ensure that the engine is completely cool prior to starting this service. 1. Remove the recovery tank or radiator cap. 2.

...need filling. Here are a few resources for burping your sentra including a YouTube video. 2002 Heater issue, did the burp/coolant flush, works only for a ... ...

Question about Mazda Protege

3 Answers

need to do it bleed the water jaket first then top up the rad,,from the header tank,,,the water in that will go down as you bleed the water jaket so keep it full up at all times mercedes benz 2005 v12

need to try myself TY This is from the autozone.com web site. Click on red X's to view pictures. REMOVAL & INSTALLATION CAUTION Never open, service or drain the radiator or cooling system when hot

Question about Mazda Protege

1 Answer

bleed the air oout of the cooling system - Their is a bleeding next to the therostat housing. 1 - When the vehicle is cold remove the rad(tank) cap and top up the level if needed 2 - start the vehicle

Not finding what you are looking for?
2003 Mazda Protege Logo

553 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...