2003 Mazda Protege "intake manifold boots" Questions

manifold but I'm not sure he is telling me the whole story or giving me a simpler fix for the idle issue. He wants $500 to fix it. Is there another soluton for him to check into for me or do you think

...manifold intake, fuel pump, corrosive battery connections, and power steering issues draining power form engine. Surely someone has a better idea than all these random guesses. I had the same issue ...

intake manifold plenum boot and the gaskets. Now the car is blowing white smoke from the back and overheating after driving for abourt 30 minutes. check system light is continuosly blinking on and off

The plenum boot between the intake manifold and throttle body is leaking vacuum. How do I get it out to replace? Hello, You have to remove the intake manifold.

...from the air filter housing to the throttle body. there are lots of vacuum lines all over the engine usually running from the intake manifold in some fashion. they are black rubber or molded ...

intake manifold. 2.The PCV valve is sealed to the intake manifold with two O-rings. 3.Free the PCV valve by rotating counter-clockwise 90 degrees until the locating tabs align with the openings on the

...upper intake manifold off to Do i need to take the upper intake manifold off to change the back 3 spark plugs? IF YOU GOT A 2.7 ENGINE TAKE OFF ENGINE COVER.YOU WILL NEED SPARK PLUGS WIRE BOOT

intake manifold to reach valve cover close to firewall. 1) The location of spark plugs 456 are under the plastic shield in front of the engine. It takes an 8mm socket to remove the three bolts holding

...intake manifold. Remove the spark plug boots from the spark plugs, and then the wires from the routing retainers. Make sure they are tagged for proper installation. Remove the rocker arm ...

...intake manifold. This creates a pressure drop in the intake, a vacuum that is maintained as the engine is running. New air that is pulled into the intake is measured by the Mass Air Flow sensor ...