1999 Mazda 626 "amp 45 70" Questions

45 - 70 MPH maybe feel a little in steering wheel feels like under drivers feet tires look OK, drives straight etc. Pulled tires & did visual inspection looks normal Symptoms indicate tires out of

...45 ft-lbs. for 289 HP & Boss 302) Cylinder head bolts 65-72 ft-lbs. Rocker arms 17-23 ft-lbs. Intake manifold bolts 23-25 ft-lbs Oil pump bolt 23-28 ft-lbs. Cam bolts 40-45 ft-lbs. Cam thrust ...

...45 ft-lbs. for 289 HP & Boss 302) Cylinder head bolts 65-72 ft-lbs. Rocker arms 17-23 ft-lbs. Intake manifold bolts 23-25 ft-lbs Oil pump bolt 23-28 ft-lbs. Cam bolts 40-45 ft-lbs. Cam thrust ...

...45 -50 MPH then again at 65-70 MPH under load. Goes away when I release the accelerator pedal. Sound like the transmission is slipping but transmission, transfer case and front dif all check out ok. ...

...caps are 38 ft/lbs (final torque). If you have the 4.3, the main bearing caps are 77 ft/lbs (final torque) & the rod bearing caps are 45 ft/lbs (final torque). I hope this helps and good

...45-70 mph Pull the valve body & clean it After that, you will have to change the proper solenoid & as far as I know, they can not be had individually yet,should be soon, as that vehicle has ...

...amp; main brgs for 1994 ford f150, 300 6 cyl fuel inj engine Main Bearing Cap Torque: Torque in 2 steps: Step 1: torque to 35 Ft/Lbs Step 2: torque to 70 Ft/Lbs The Rod Bearing Cap Torque: 45 Foot ...

...amp; turned the whole cluster clockwise very slowly and needle started moving from 150 mph back down to 0 mph when rotation was completely done. Kept cluster upright while re-installing and plugged ...

...amp; it drove just fine but the whole truck was vibrating still. when i drove faster the vibrations almost quit-when i reached 45 mph it slowed almost completely. sounds like a bad  u joint or ...

amp; WASHERS, OIL THREADS SEE SEPARATE SHEET FOR TIGHTNING SEQUENCE STAGE 1---18 LB/FT 25NM STAGE 2---90 DEG's additional bolt head rotation. STAGE 3---90 DEG's additional bolt head rotation. STAGE 4-