1998 GMC Jimmy "pitman arm" Questions

pitman arm instlation how do you take off and put on the pitman arm on a 94 gmc jimmy . what tools do you need for do it your self? YOU WILL NEED A "PITMAN ARM PULLER". YOU WILL NEED TO REMOVE THE ...

...arm and or pitman arm most common.could also  be excessive play in steering gear box.Tie rods/center link but usually its my first 2 choices go bad bothe of them idler and pitman common wear ...

...pitman arm and have never taken out a gearbox before and I would like to know how it's done could you help? You dont remove the gear box to remove a pitman arm. They have a tool called a pitman arm ...

pitman arm replaced and idler arm replaced I went to get new tires for my 1997 Jimmy and they told me they could not align the wheels until the pitman and idler arms were replaced. To save some money,

...pitman arm is there a place I can go to online to print up instructions on how to replace this part? You might want to try your local library. Many libraries have do it yourself books online. The ...

...pitman arm ball stud nut at the relay rod. Disconnect pitman arm from relay rod using J 24319-B . Remove the steering gear mounting bolts and the washers from the frame. Remove the steering gear. ...

...to shimmy at all speeds? i feel it more at higher speeds. Idler arm will cause your shimmy also check the pitman arm for any movement up and down.Most of the time the idler arm will wear out

want to know what the torque specs are for the idler arm, pitman arm and bearing hub and tie rods? for a 1998 gmc envoy 4x4 automatic 2000 gmc jimmy front cv axle nut (36 mm) torque ratings?

...arm and pitman arm installed. The vehicle has 140,000 miles. Any ideas?? Hi and welcome to FixYa! The new under chassis parts installed can cause the steering to be a little stiffer. It is normal and ...

pitman arm, idler arm and the inner tie rod ends replaced in July 2009 when I purchased a set of new tires. Now, a year later, I had another shop advise me that idler arm is loose. Quote is $526.00...