1995 GMC Yukon "replace intake manifold gasket" Questions

intake manifold just under valve cover how do i fix this most likely the intake manifold gasket will need replacement. but find out exactly where the leak is first. The intake manifold gasket needs to

replace intake manifold gasket intake manifold how to replace intake manifold on a 99 gmc yukon sle 5.7

...intake manifold gasket on my 97 yukon it starts fine when it is cold but cranks slow when it is hot doesnt the timing adjust itself? distributor has to be installed correctly and then timing set with ...

...gasket needs replacing, and it evaporate the coolant. So as you can see, if there are no visible leaks, it is probably a problem from the inside of the engine. intake manifold gasket probably ...

...intake gasket. You will have to replace it the gasket kit cost about $100.00 make sure you but the Fel Pro gasket kit it has been redevelope and made from steel rather than plastic. This will solve ...

...manifold and being sucked into the engine, or being blown into the exhaust system and being boiled away. Ask a radiator repair shop to carry out an O2 test on the coolant. They may detect presence of ...

...manifold was constantly purging. I replaced the purge valve abnd code has not been back. It was $40. Partially restricted fuel injectors will cause too lean condition. Good fuel injector cleaner. If ...

intake manifold gasket replaced. when every i get on the highway the gas just fall out the truck. please help Was the fuel mileage better prior to replacing these parts? Did you use an aftermarket MAF

...replace a intake plenum gasket remove and replace Well basically, you remove the intake plenum and replace the gasket and reinstall the plenum. Here are the steps:1. Disconnect the negative battery ...

...pcv valve going into your intake manifold will cause a gasket to swell. but it should not be to the point where it's noticeable. you should probably replace the intake manifold gasket at this