replace intake manifold gasket intake manifold how to replace intake manifold on a 99 gmc yukon sle 5.7
1995 gmc yukon. the vaccum for the transmition came off from the intake but i cant find were it connects in to the intake?? THE VACUUM LINE SHOULD CONNECT ON THE BACK OF THE INTAKE ON THE DRIVER SIDE ...
ihave a small coolant leak looks like intake manifold just under valve cover how do i fix this most likely the intake manifold gasket will need replacement. but find out exactly where the leak is ...
...out right under the a/c compressor seems like its coming from inbetween the valve cover and intake more than likely it wouldn't be the freeze plug but normally the these vehicles leak from
...valve. u may have a sludged up idle speed control valve, do the following procedure. Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company ...
Question about GMC Yukon
I need a picture of the upper intake manifold torque sequence for a 98 yukon, 5.7 liter engine My manual is only showing lower intake specs Have you checked the Haynes manual ?
im getting spark for the plugs and im getting fuel. i even put starter fluid in the intake and gas but it wont start it just turns over and nothing A 1999 GMC Yukon has a fuel-injected engine. They ...
Where is my egr valve located on my 97 yukon ? its near the front of the intake manifold look for a pipe going to it the pipe will be wrapped It should be located right next to the A/C ...
...computer replace map replace o2 replace wires good fuel volume test good pressure 43 psi replaced intakes no hard starts starts just fine check your air intake control switch: it is on the manifold ...
...when I turn it off, I just had thermostat changed and still same problem? well you might have an intake manifold leak or teh heater hose niple that goes in the intake these are the most common ...
339 questions posted
Usually answered in minutes!
593 Questions
524 Questions
309 Questions
326 Questions
238 Questions