2002 Chevrolet TrailBlazer "replace tensioner pulley chevy" Questions

Ad

Question about Chevrolet TrailBlazer

2 Answers

tensioner pulley last. Make sure your belt is all the way on the pulleys, you should now be able to slip the belt on this way. You can spray a small amount of WD40 on the pulley to help the belt slide

Ad

...fan or your shroud to replace the belt. Its all under a tensioner pulley you have to put a 18 mm wrench on and pull towards the inside and you should see the belt loosen up enough to take belt

Ad

...pulley. It twists to the right, or clock-wise as you are looking at the engine. Use a 3/8" ratchet handle and possibly an extension. Good Luck. I'm not sure if you have a v8. BUt the tensioner acts ...

Question about Chevrolet TrailBlazer

2 Answers

...replace water pump". You will find a thread with a procedure and pictures for the work required. For the I6 engine.... Just changed mine last night at 170k. Remove two top fan shroud bolts 10mm, ...

Question about Chevrolet TrailBlazer

1 Answer

...start troubleshooting the problem. REPLACE THE TENSIONER IDLER PULLEY.THE TENSIONER IDLER PULLEY MAINTAINS THE BELT TENSION WHEN IT GOES BAD.THAT WILL LEAD TO LOOSE BELT TENSION CAUSING BELT TO

...replace it myself. A year is not a good sign. The belt should not have come off in that span of time. I would make sure you do not have a worn out idler or tensioner pulley bearing before installing ...

Question about Chevrolet TrailBlazer

1 Answer

...tensioner to put it back.  You draw the belt and pulleys on a sheet of paper before removing, otherwise there should be a small diagram of the belt and pulley positions on the fan shroud or ...

Question about Chevrolet TrailBlazer

1 Answer

tensioner pulley, but not the actual tensioner.sounds like chirp is coming from power steering pulley. im already $140 deep and still didnt fix it. any ideas? The chirp is from scale or a glaze on one

tensioner pulley. Why is this happening? you most likely have to change the tensioner assembly some people just change the pulley itself but the arm that the pulley bolts to wears out allowing the arm

Question about Chevrolet TrailBlazer

1 Answer

in place but I may have stripped it because the bolt is relatively loose but will not come out. The pulley bolt turns RIGHT to loosen it. Replace the tensioner assembly. That bolt turns LEFT to loosen

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

3,943 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...