Power steering went out on a 2002 trailblazer. the serpentine belt was slipping off so I replaced the serpentine belt and pulley tensioner, still out. Pulled the steering pump, pulley shaft was broken
...power steering went out was hard trying to turn wheel pulled over and it was leaking on the driver side it wasnt making no noise it just happen so what should i do cant find the leak Sounds like ...
...power steering pump it takes a special tool pull off the pulley,the rest is just one step at a time,after r&r bleed the system or u will burn up the new pump. to bleed jack up the front end and ...
...power steering pump, the a/c compressor, the A.I.R. pump if you have 1. they can cause the noise also. if the fan has a clutch with engine off see if there is any play in the clutch. can test all ...
...power steering pump Have you tried bleeding it first? Jack the front end up so that both front tires are off the ground. For safety, use a set of jack stands. Take the PSP cap off. Put a pan ...
...pull the power steering pump off to get the phazer out. But you can just take the bolts out for the pump and let it fall down so you can get the phazer out! both those codes are cam sensor codes. a ...
...power drill to the pulley tool and pull the trigger to remove the pulley securing nut. Remove the drive belt and the pulley. 3 Position the drain container under the power steering pump. Remove the ...
Question about Isuzu Cars & Trucks
...power steering pump. The electrical connectors may require you to depress a tab or pull up on a locking tab before disconnecting. Remove the bolts that secure the AC pump and power steering pump to ...
Question about Chevrolet TrailBlazer
...but still no power steering and no power brakes?? Check power steering pump for broken pulley shaft. Pull on pulley and if it pulls out of pump, the shaft will be broken and pump replacement ...
Question about Chevrolet TrailBlazer
...pull the power steering pump off of the 1995 surbuban 350 engine in order to replace the high pressure hose? If so what special tool is needed to pull the pulley off the pump, in order to get to the ...
3,943 questions posted
Usually answered in minutes!
3,219 Questions
1,576 Questions
1,050 Questions
976 Questions
217 Questions