1999 Chevrolet K1500 "p1345" Questions

How to fix p1345 obd code on 97 chevy 1500 5.7 Lt. P1345 is "Crankshaft position sensor / Camshaft position sensor correlation" Code P1345 determines if the distributor is installed incorrectly, or if

1996 gm van p1345 CODE P1345 CAMSHAFT TO CRANKSHAFT POSITION CORRELATION CONDITIONS.POSSIBLE CAUSES - CMP SENSOR IS LOOSE CAUSING A VARIATION IN THE SENSOR SIGNAL - EXCESSIVE FREE PLAY IN THE TIMING ...

my truck will start but once i turn it off it won't restart i put com on it and i get p1345 my truck will start but once i turn it off it won't restart i put com on it and i get p1345 dose

i have a 98 chevy z71 5.7 350 vortec, i have a p1345 code that stays on i clear it and as i restart the truck it comes back on, the truck runs great and has a small delay when starrted.. what can/do i

P1345 code DTC P1345 - Crankshaft Position (CKP) - Camshaft Position (CMP) CorrelationThe most likely cause if you have replaced the cam position sensor is the distributor is out of time. You MUST use

chevy engine code p1345 you have to take the dist out and check the gear at the end, they wear thin and set this code. install new gear and set the dist for corrolation 0 degrees +2 or -2 degrees. you

is a p1345 enough to stop a truck from starting? So my truck runs great just every now and again it decides to not start after turning off. Fuel pump is fine, filter isn't clogged. Could a ...

GM OBD2 code 1345 causes causes for code OBD2 p1345 either the crankshaft sensor needs to be changed or camshaft sensor.Both work together and are under that code.If you change the sensors you will ...

...p1385 what are the solutions? One of the codes could mean  the ignition timing is off.Code p1345 is for a difference between cam and crank sensor signals, but a 1999 truck uses a ...

...misfire on cylider 3 ... 1997 k1500 5.7l po303 misfire on cylider 3 ... rough idle, also obd2 code p1345 . replaced fuel pump, filter, 3 oxygen sensors, catalytic converters, cap, wires, plugs,