2002 Pontiac Grand Am "oil pressure sensor" Questions

...oil pressure sensor. Remove the engine oil pressure sensor. To Install: Install or connect the following: Engine oil pressure switch. Tighten the switch to 12 ft lbs (16 Nm) on the 3.4L engine, 16 ft ...

...oil pressure be regained after a substantial loss due to faulty sending unit? (if oil cahnge don't seem to be enough!) Your oil pressure can be effected by several things. If you visually look at the ...

...Oil Pressure Switch, also commonly known as the Oil Sending Unit. It's a sensor that when failing, will indicate low oil pressure either due to a lack of oil or insufficient pressure through the oil ...

cant locate the oil pressure sensor it is next to the oil filter, requires a oil pressure sending unit socket to remove and install properly.

...oil pressure sensor where the oil pressure sensor is located on a 2000 pontiac grand am 2.4L see the big cover on top that says 2.4l go towards drivers side see the plug in for the cover assy, now ...

...oil pressure light comes on, let car cool down, check the oil and it's full what could that be? First of all replace o2 sensor on driver side after the catalytic converter that will take care of ...

...oil pressure sensor, where is it found The oil pressure sending unit is located to the right of the oil filter and just above the starter motor. This is on the 3.4 liter V6. On the 2.4 liter 4 ...

...sensor. It should be idling around 900rpm and the oil light coming on ( assuming you have enough oil in the sump) will be because of the very low idle rpm not pumping enough oil to maintain

...oil pressure switch if it was working yeah it's working . the oil pump is working. I need help tell me what at i can do about it. try to knock the sensor a bit. gunk fouls the sensor so they stick. ...

will oil leak from a broken oil pressure sensor? No pressure reading on gauge, and leaks after oil change when it didn't before Yes ,even if it is still working it still can keek.