1998 Nissan Sentra "remove glove box" Questions

glove box and remove the screws then the screws along the bottom of the glove box at the bottom of the dash the box will slide out. Remember to disconnect the light if it has one. Now you will be able

...glove box. remove glove box, and you will see the blower motor. resistor is beside the blower motor. it only has a couple of screws.if you think you can get to it without removing glove box. this is ...

Remove the glove box latch by removing the two screws.Remove the three screws at the bottom front of the glove box.Remove the insulation piece under the box.This was a pain but i finally got it, reach

...glove box While driving my 2004 Nissan Sentra, all of a sudden I heard a ticking noise, it sounded like a loud blinker, and it was coming from behind the glove box. Once I stopped the car, I removed ...

...out at vents you should change the air filter. behind the glove box is the location of the a/c air filter. 1. remove glove box 2. remove filter cover then replace with new one. hope this would

...glove box but not sure if I amloking in the right place. this solution is a little late, but if not already done here is how to fix. yes its the resistor pack, i just fixed this on my 97 sentra. you ...

...Remove the glove box by undoing two hinge pins. Rotate the hinge pins upwards and slide them out. The glove box will drop out and you have access to the resistor. Unplug the wiring connector from the ...

...remove the glove box Then you will need to unbolt the evaporator box Tip it back and remove. Once you have the evaporator box removed, then you can replace the expansion valve. I would also clean the ...

...glove box. Remove the glove box by releasing the two pins at the bottom. Then using a phillips screw driver remove the black cover and this will give access to the filter slot. Hello dinahhalterm: My ...

...remove. first open your glove box and squeeze the two sides to drop the box out. then on the left towards the radio there is a gold bold. I believe 10mm socket would fit. unbolt that and that should ...