1997 Nissan Pickup "97 truck 2 balancer" Questions

...replace a harmonic balancer,and how expensive on a 97 olds lss not supercharged harmonic balancer, should be able to remove bolt and pull it off by hand was not a pressed pulley for the 3800 series ...

...2. Install the A/C drive belt (1) to the engine. 3. Install the power steering gear. 4. Install the power steering cooler to the front crossmember. 5. Install the power steering cooler bolts. ^ ...

2 more that could be balanced perfectly. There is actually a Buick factory TSB on this very common vibration complaint with the '97 Park Avenue, and I assume it would also apply to the '98. Apparently

97 chevy tahoe. codes po161 and po175. also bad vibration just replaced maf sensor with a true blue sensor off of ebay could faulty maf make o2 sensor bad and make rich on bank 2. also maybe unrelated

...97 lesabre what do i need to change on the motor or does it just interchange with no problems? Well there are several 3.8 liter engines 8th digit in the vin tells it all Vin3,C,K,L are all different ...

...97 rodeo is su who>? one that runs, wow. its not that simple. there are at least 2 readings, not counting, injector balance tests. key on pressure and running pressure. 4 engines. and 1 diesel. ...

...97 buick lesaber Hi, The sensor is located to the right of the crankshaft behind the vibration dampner (harmonic balancer). You will need a balancer puller and a special tool to space the new sensor ...

...97 3500 454 auto I replaced the distributor gear and reinstalled the distributor, set the timing. The problem is when the throttle is fethered and the engine is not under a load the engine hesitate ...

...97 gmc seirra. Misfires and backfires sounds like it’s from the intake. I removed distributor whole thing and the sensor in it. Now I can’t get the truck to run it’s is off timing now. But it ...

...97 should be under your Distributor Cap and Rotor Button. The easiest way to change it is remove the 4 plug wires on the drivers side. Then unscrew the 2 screws holding the Distributor Cap on and ...