2001 Chevrolet Malibu "reset computer" Questions

2010 Chevy Malibu computer reset Replace motor now I need to reset computer You can disconnect your battery for like 15 min or use an codes reader to reset your codes

...reset the computer Reset computer to clear trouble code? If this is the case and you don't have a OBD II scanner, disconnect the ground cable for about 15 min. this will clear the trouble codes. Good ...

...reset the computers. How far do I need to drive and how will I know when it is completed? at least 50 to 100 miles, once the computer resets the light will go out. have a great day !! if no more ...

reset button for the computer on a 99 Malibu. No vehicle has a reset button You disconnect the battery cable or use a code reader or scan tool

...problem, or does it need to be reset. It needs to be reset probably has a p0440 code in the computer. It needs to be reset or cleared this can be done at your local AutoZone or local repair

...computer to reset. usally wrks and it doesn't cost any thing to try. keep it unplugged for about an hour or so maybe? turn car on engine off, let set to on for 10 min.after 10 min, turn off for 15 ...

...reset" you can do without a dealer scan tool is to unhook battery for about 5 minutes, this puts computer to sleep and erases memory codes stored. If there is a programming issue the car will need to ...

computer needs to reset it, or clear codes. You can do it at home by disconnecting the battery, but make sure to turn off the radio, dome lights etc, before disconnecting. Let it sit for a few minutes

...reset the computer codes 9 times and the problem re-occurs. i hope you didnt pay anybody too reset the computer codes that has nothing too do with the problem your problem is that the filler hose ...

how to reset conputer system after oil change try turning on your ignition key, but do not start the engine, then press down on your accelerator to the floor and let off of it, < 3 times within 5 ...