2000 Chevrolet Blazer "loose steering" Questions

steering coloum loose on 1991 chevy s10 blazer my steering wheel was very loose, I tightened the 4 screws that were loose. My problem is I can not depress the spring far enough to install the ...

...CENTER.BEFORE BUYING A NEW RACK PINION.CHECK RACK MOUNTING BOLTS FOR LOOSENESS.CHECK RACK PINION MOUNTING GROMMET.ALSO CHECK FOR LOOSE WORN TIE ROD ENDS.IF WORN THEY WILL CAUSE PLAY IN STEERING

...steering is loose on my 1997 Chevrolet blazer. I replaced the steering box, which helped a lot, but it still has about an inch of play in the steering there is an adjustment on steering box also ...

Steering column loose and causes auto to stall and jump out of gear when steering wheel moves. There are 3 tilt colum screws deep inside the colum, it's common for them to come loose and eventually ...

loose steering box mounting bolts on the chassis. Check that the top bearing in the steering box is ok as if it is shot the shaft will move up and down rather than push or pull the steering nut in the

...loose and cause the steering wheel to move a little bit. I fixed that problem, but now I'm stuck. I believe there is something that is supposed to attached the shift tube to the gear bowl or the ...

...steering wheels get loose from people using the wheel to assit them in and out of the vehicle, it is a very common problem and it is from the tilt bolts coming loose inside, if you do not have a lot ...

...one turn's wheel a little back & forth and check for slack, Also check front end linkage for looseness, don't forget wheel

...steering feels loose, I can turn the steering wheel about an inch in each direction before the car starts to turn, I have had the ball joints replaced and I have been told the tie rod ends are good. ...

...steering is loose when u turn about a inch before the wheels turn blazer s 10 4 x 4 check tie rod ends they might be wore out when you turn the steering wheel they should move immediately with no ...