2000 Chevrolet Blazer "kick panel passenger remove" Questions

Ad

...kick plate panel. Remove the screws holding the panel in place. Remove that panel. Remove the front filter by pulling it down/ out. Slide the rear one forward and do the same. Now install the new ...

Ad

Where is the heater motor placed on a 98 chevy blazer remove the passenger side kick panel under the dash and youll find the blower motor in the ac box

Ad

Question about Chevrolet Blazer

1 Answer

...right foot be. Remove the side kick panel to get to module. Disconnect battery before unpluging and pluging new mudule in. This unit controls the electronic switching between 2 and 4 wheel ...

Question about Chevrolet Blazer

1 Answer

...kick panel trim from both the drivers and passenger side foot well. There are 2 bolts on each the drivers and passenger side that hold the sides of the dash board to the vehicle, then there are I ...

...kick panel remove the cover and you will see a computer module. check the connection on the top of it for burnt wires or shorting wires. this is a common problem with blazers. you can try to reapir ...

Question about Chevrolet Blazer

1 Answer

...kick panel and expose the Heater Core to find out where the leak is coming from. It could be as simple as tightening a hose, or hose replacement, or replacing the Heater Core itself. Let me know if ...

Question about Chevrolet Blazer

2 Answers

...kick panel on passenger right front .unplug silver box for a min. and plug in. worked on mine I had the same issue with mine.. It was a vaccum leak.. It ended up at a shop for 3 days!! $450.00 buck ...

Question about Chevrolet Blazer

1 Answer

kick panel is a module that controls the 4x4 and it should be clicking as you try to put it in 4x4.#2:There is a vacume activator switch on the transfer case located on the top on the drivers side.(If

Question about Chevrolet Blazer

1 Answer

...kick panel on the passenger side to reveal (what I was told was) the transfer case. I inspected all the wires to the make sure there were no breaks or loose wires. Then I tried cleaning the contacts ...

...kick panel. Make sure the connections are dry and doesn't look like water has been leaking on it. make sure the connections are not corroded and locked properly. If all looks good and the 4wd module ...

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

3,418 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...