1998 Chevrolet K1500 "replace chevy silverado blower" Questions

chevy silverado? It stopped working altogether then I replaced a 10 amp fuse and now only medium high and high will work but, switch will not turn back to medium low and off positions. Sounds like you

heater/airconditioner only works on high? 1998 Chevy Silverado and the heater/airconditioner only works on high? your blower motor resister went bad and needs to be replaced

...Chevy 1500 Silverado the blower is not working and I have replaced the fuse 2 times, the 1st time it worked and lasted for about 2 weeks, now I have the same problem, after replacing the fuse for a ...

...chevy silverado 1500 seems to drop below 14v could there be a relay that needs to be replaced or do i need to change the alternator If it runs way below 14 volts there is usually a problem, but if at ...

...chevy silverado 1500 heater was not working on blower settings 1-2-5 but worked on3-4 now its stopped working all together is it the blower motor or the heater control I would replace the blower ...

...Chevy Silverado AC blower only works on 5 2003 Chevy Silverado AC blower only works on level 5, suspect low level resister. Is it easy to get to...behind contols, under dash, near blower? Hi replaced ...

Chevy silverado - Blower stays on high, heat on high. Motor runs with key out - will not stop. the blower motor speed control module is defective, replace it. check your ignition. power not suppose to

...Chevy Silverado 4wd HD. Blower motor started running all the time even whe the key was removed. I removed the fuse under the hood and the fan stopped. It now works only on speeds 1-4. Is there a high ...

Chevy 2007 Silverado-blower motor not working FAN DOES NOT WORK AT ALL. CAN SMELL BURNT ELECTRICAL COMPONENTS. The bower motor is most likely what you are smelling.Replace the blower motor,and the ...

...Chevy tech told me that if it keeps doing it, to replace the blower motor, as it seems to be a chronic problem with the blower having to much resistance and thus burning out the resistors. I suspect ...