Setting the timing on modified motor. i Have a 1979 carb. 350 small block. the manual says to set the timing at 6 deg. BTDC. The motor was bored 40 over. What should the timing be set at? Thanks much.
timing off on 1997 Camaro will not spark Car ran fine before wannabe mechanic mis timed the car. Get the correct firing order of the car and re-set the firing order. Put the timing mark on the ...
car sitting for a year when I get back from Afghanistan, my car will be sitting for a year. What things should I be doing to get it back in good running order. I have a 2000 Ford Escort Zx2, if that ...
...for an oil cooler, such as for trucks. The adapter goes between the oil filter and the
a 350 small block engine,are bthere a tappet setting because when i tighten them right down,they are opening in every sylender tighten each tappet at each cylinder untill just touching each valve on ...
fuel pump pressure on 1969 small block camaro 6-8 psi, usually will give 60-80 gph (gallons per hour) well factory spect is 5-7 psi,do you have electric fuel pump you will need to install fuel pump ...
hard start my 1995 camaro z28 always seems to have a problem when first starting. i replaced the plugs and wires and that stopped the miss fireing problem but i still have to let it crank for a wile ...
...pushrod and newr motors did not have this option look on the side of your motor and see if it has a block off plate if so you may be in luck remove plate install the pump rod and rotate motor by hand ...
...the feed side of the fuse with the key on. If you read 12 vdc then battery is present at the fuse block. If battery is present at the block...carefully pull one fuse at a time and, rather than ...
...ECU reset, and that may fix your problem. I would not suggest manually restricting the air flow by blocking or pinching the intake tubes or blocking the air filter, this will cause further problems, ...
783 questions posted
Usually answered in minutes!
737 Questions
468 Questions
391 Questions
331 Questions
306 Questions