...hood. then replace the cable. the further you can reach up under the panel the better your chances of getting past the broken part of the cable and avoid removing the grill. you might also be able to ...
...hood has a latch mechanism which locks around the "u bracket" if the latch is in the closed position try some wd40 or other penetrating oil to help free it up and try working the inner and outer ...
...hood. Please rate and god bless:) You should be able to replace the bulb from the rear of the light from inside the engine compartment. I is a small bulb unlike the hole light as in older cars. You ...
Question about Chevrolet Cars & Trucks
...release it, if it does open lube the hood latch with white lithium grease AKA "Lubriplate". Make sure the inside handle is still attached to the cable. If so, have some one push down on the hood as ...
hood release handle is fully in. Sometimes they stick out and keep the latch from engaging. If it is in, then spray some lube on the latch assembly, such as WD-40, and cycle the hood release handle to
...hood is closed and latched. Any help would be appreciated you probably have to open up the hood latch assembly and replace the sring. sounds like it broke. or maybe the cable. can you push it back
Question about Pontiac Grand Am
...grips and fix it to the handle. Put the housing and lever back, then connect at the hood latch. Videos here https://www.google.com/search?q=2012+nissan+maxima+replace+hood+release+cable+replacement
...to open hood so you can replace fix hood release handle and cable. You will need to take out the bumper , the grill and others components then from there try to move the latch so it can be
...hood while the coat hanger is being applied to relieve spring tension -There are two way to fix or replace. 1. Replace with new one. 2. If the wire broke between the handle to the latch, you can ...
Question about Pontiac Grand Am
handle under the dash is broken and I need to replace the complete hood release cable assembly Long at the base screw next to the handle. You need to make space on the handle end to pull the latch off
2,566 questions posted
Usually answered in minutes!
1,538 Questions
1,504 Questions
1,435 Questions
1,208 Questions
1,285 Questions
