1997 Pontiac Grand Prix "remove plug control module" Questions

Ad

Question about Pontiac Grand Prix

2 Answers

...plug wire''s from engine to coil packs. If you have a 3.1L engine, the module will have three connector, two one one end and one in the other end. If you have a 3.8L engine, the module will have one ...

Ad

Question about Pontiac Grand Prix

1 Answer

...plug it back in it may work again. Sometimes they lock up. Body Control Module Replacement Removal Procedure Notice: Electrostatic discharge (ESD) can damage many solid-state electrical components. ...

Ad

Question about Pontiac Grand Prix

1 Answer

...module scanned to retrieve the trouble code(s). This will at least give you a direction to go in and start searching. The traction control uses the ABS system to work. If there is a problem with the ...

Question about Pontiac Grand Prix

1 Answer

...module, the PCM and the map sensor. I double checked the camshaft and crankshaft timing. All the plugs and wires are still good. I still cant get the car to run right. I even replaced the injectors ...

...remove and turn this upside down to inspect it for breaks or lumps in the wire or signs of corrosion on the terminals to and from underneath. Note: Do not turn the car over unless that spark plug is ...

...Remove the plugs in the BCM and check them for corrossion, A soft wire/brass brush works great. Now for the BCM, this is very suseptable to static charge, so touch any piece of metal before you open ...

Question about Pontiac Grand Prix

1 Answer

plug wires and battery but check engine came back on and car shutoff while i was driving right after i got it back but after i put it in park turn key off and restart it starts right back up- that was

Question about Pontiac Grand Prix

2 Answers

plug wires from the ignition control module and reposition. Relieve the fuel pressure. Remove or disconnect the following: Fuel rail assembly. Brake booster hose from the vacuum source manifold in the

Question about Pontiac Grand Prix

1 Answer

...remove the screen. You won't interfere with proper functioning of the regulator by removing the screen. Query: It's extremely unusual to have to replace the intake manifold. If you brought ...

...plug to gain access. Measure across the pins going into the hub, should produce a resistance, typically around 20 ohms but the key is that it measures the same on each sensor. Then measure it also ...

Not finding what you are looking for?
1997 Pontiac Grand Prix Logo

1,264 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...