Check engine light doesnt illuminate when key turned on You will have to check if there is other bulbs off when bulb check then have a pin out check on obd2 connector if power and ground. and with a ...
Question about Pontiac Bonneville
pcm is not grounding injectors. need a pin diagram and ground location diagram checked for injector pulse while cranking with noid lite. no pulse. checked the purple wire for 12 volt, key on. checked ...
my car wont start, nothing, dead .. battery is good any ideas. check the ignition wire to the starter(smaller wire ,purple color) with the key in start position with a 12 volt test light test to see ...
Check engine light 1990 Bonneville check engine light-code 13 O2 sensor. Replaced it and cleared the code but the light came back on intermittently with the same code. What else to check? check the ...
code p0303 mis fire on # 3 changed spark plug and wire,checked all fuel injectors changed o rings on all 6 still brings up code,idile rough What year and model? What engine size? have the intake ...
Car will not start no gas coming out of fuel rail check for power to the fuel pump and pump operation. check filter condition. check for fuel in the tank (do not rely on the gauge) check for proper ...
Question about Pontiac Bonneville
...battery to the engine in a 2000 bonneville no power coming from the battery to the engine. Have you checked your battery? Does the dashboard light up?Check your fuses first, then check your battery. ...
Question about Pontiac Bonneville
check oil light comes on while driving then shuts the car off my 1994 pontiac boneville check oil light comes on while driving and the car shuts off completely and starts after sitting for a while but
I am working on a 97 pontiac bonneville with a 3.8. how can i check the pcm. the car wont start. im not getting any spark or anything. i have checked the crank and cam sensors. i have also checked the
heater ac fan does not run. checked fuses, they were good. Check whether there's a current to the motor (probing lamp). If yes, check the brushes powering the rotor. The most common problem is the ...
812 questions posted
Usually answered in minutes!
496 Questions
481 Questions
432 Questions
391 Questions
329 Questions