1995 Nissan Maxima "idle control valve located" Questions

...have an idle control sensor? Where would it be located? no idle control sensor but it has both an IAC, idle air control valve and a T, throttle position sensor both are located at the throttle ...

...Idle Air Control motor (inside the throttle body) controls idle using a variety of inputs through the Powertrain Control Module. Rough idle and stalling most often occur when the idle speed drops ...

...Idle air control valves short out all the time on these models. You can ohm the motor to check it, but the down side to a shorted iac valve is that it shorts out the ecm if not repaired quickly. when ...

idle controls dead 4: lean AFR. and ISC has lost control or makes it hunt. 5: intake air leaks. 6: ECU in limphome. the USA cars (no location stated, bad) all usa cars have OBD2 this year, ever use a

idle air control valve need replacing. this controls your idle speed it is pretty simple to replace just a couple of screws and a electric plug holds it in place. It is located by you thottle body..go

idle air control valve) is going bad. The IAC, as it sounds, controls the idle of the vehicle and when they go out, the car will have a hard time idling and will often stall out. The IAC is located on

Where is the idle air control Valve located on the 2000 Nissan maxima Here's a video to see.

where is the idle control valve located? Near the trottle body follow the air filter air duck hose that goes to the trottle body

...Idle air control valve is bad, the vehicle rpm is high at idle. I have been trying to locate the iac but could not find it. The iac is located on your tb. It has a brown and a green connector going ...

...because it's a B- - - H to get to. It's your IAC valve or idle air control valve and it's located underneath the intake manifold. The part might cost $40 but labor is a different story. Good