...grinding noise comes from the fuel injectors area. I also get a strong smell of gas during this time. My check engine light is not on, so I can't get any codes out of the computer. Could be battery, ...
...grinding noise... i truned the key one last time and the noise was still there but the motor started and the noise vanished... the noise is only present when i start the truck bad starter would be ...
Question about Nissan Maxima
...grinding noise. Someone said possibly the flywheel... It isn't getting any worse and doesn't really cause any major issues, more of an annoyance, but I would like to get it fixed. Any ...
...noise. Its like a grinding, rattling noise coming from the passengers side, its so loud. We tried to figure out if there was a reason but we've yet to find any. We never know when its going to happen ...
switch.the grinding noise you hear is probably the starter still engaged. thanks jeff the place were the key goes is called the ignition cylinder. the ignition switch is located in the steering column
Question about Nissan Maxima
...grinding then the truck moved alittle bit and lost reverse. Then lost all forward gears. could it be the transfer case or tranny it sounds like the transfer case is in neutral good test start truck ...
...grinding or any other unusual noises like its a starter problem. once the car reaches temp you can shut the car off and it wont crank the starter . there anre no noises at the starter when you try to ...
...grinding noise, like a bad starter, a couple of tries and then siezed up. Any ideas on where to start? ALWAYS START WITH CHECKING FLUID LEVELS AND CONDITIONS.THIS ENGINE SHOULD BE A NISSAN BUILT V6 ...
noise when you tried (grinding or groan hum exe..) or just not work. If so the first thing I would do is to change the transfer case oil, check for metal in the oil, if there is that's really not good
Question about Cars & Trucks
grinding noise the past couple weeks now it won't do anything. What should I do ? Grinding noise is caused when the starter drive gear isn't meshing with the teeth on the flywheel. Either the start is
1,542 questions posted
Usually answered in minutes!
1,309 Questions
1,007 Questions
857 Questions
783 Questions
480 Questions