1999 Nissan Sentra "remove 1 engine" Questions

procedure for removing manual 5 speed transmission? 1. Are drive on ramps good enough for height? 2. How does the engine have to be secured, from the engine compartment or under the car? Here's a link

...Remove the oil filter. Have a small cup ready to capture 1 ounce of oil. Unscrew the solenoid power supply from the post. Use pliers. Unplug the harness from the solenoid socket that comes from the ...

...1.6 dohc GA 16DE engine (with diagram please). Dirk Here you go This will help you Nissan Sentra Print To remove front cover the crankshaft damper or pulley must be removed, this usually requires a ...

1:00 position. Remove the cam chain tensioner by unbolting it, and remove the distributor. Apply a paint mark between the camshaft sprocket index marks to the cam chain. This is where you will install

...1 Remove the VTC valve from the vehicle. 2 Using a fused jumper wire, apply battery voltage to terminal 1, and ground to terminal 2. 3 If the valve is functioning correctly, the plunger shaft in the ...

...1 second. You could remove things like your rear seats. Or if you don't want A/C, you can remove that and if you don't want power steering, you can remove that. Those will free up extra power from ...

...1 - 4): 6.3-8.3 N.m (0.64-0.85 kg.m, 55.8-73.5 in.lb). Install oil pump drive spacer. Install water pump and water pump pulley. Refer to REMOVAL AND INSTALLATION . Install idler pulley and bracket. ...

...Remove the lower front cover. Loosen the tensioner pulley nut to slacken the timing belt and then slide off the belt. To install: Do not bend or twist the timing belt. NEVER rotate the crankshaft and ...

...remove the no 1 spark plug or injector. Place a straight piece of wire into the hole and slowly turn the crank until the wire is pushed right to the top. At this point there will be a slight movement ...