2000 Mercedes-Benz E-Class "pin count" Questions

...pin connector next to the battery. pull the little cover off the connector that sits on the firewall. With the key in position 2 and the engine not running push the little button in for 3 seconds and ...

how do you program a keyless remote for a 2004 kia sedona ? and how do you count the pins in the dlc ? Most of the time key programing has to be done at a dealership. You count the pins on the dlc ...

count clockwise turns to the same # removal took & lock the outer bolt to the steering arm and lock inner bolt too.Install a new cotter pin in outer holdown bolt & your set. You may still need

...pin from nut. remove nut use tierod end splitter to knock it loose. loosen nuts on sleve count how many turns out untill it comes off count same number of turns in get a front eny aligment Jack up ...

check engine light turns on. Count & write down how many times it flashes. It will flash for example 3 times stop then 1 time = 31 code. In older 8 pin connector jump the 2nd & 4th pins on top

...pin wires turn ingnition on possition and count 6 second then remove the paper clip and count 4 seconds then plug it in and count 2 seconds and the air bag light flash it 2 time fast and the code are ...

pin configerations in the OBDII connector ,look carefully on your code reader and count the number of pins ?? the pins you need are copyrighted hence your code reader is as obsolete as black and white

...pin D is feald service mode with key off jump d tto e useing a smallwier or paper clip woks well then trun key on and count flash on service engin lite if no falt found should fash code12 three times ...

pin from left. 5)Turn key to on position, but do not start the car. 6)Watch blinky check engine light on dashboard. Count blinks. Long blinks = 10, Short blinks = 1. 7)Keep watching blinky light until

which of the 3 pins on the OBD connector can I put a jumper so I can read the codes there is no way to do it but on a Chrysler product you can see the codes by turning the key on and off three times ...