1994 Buick LeSabre "4 center head bolts" Questions

Ad

Question about Buick LeSabre

1 Answer

...bolt torques spec 1999 Buick Le Sabre 3.8L head bolt torques spec 3.8L V6 cylinder head bolt torque step 1 37 ft lbs. step 2 an additional 130 degrees step 3 4 center bolts an additional 30 ...

Ad

Question about Buick LeSabre

1 Answer

...4 an additional 30 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be ...

Ad

...3.8L V6 connecting rod torque step 1 20 ft lbs. step 2 an additional 50 degrees cylinder head torque step 1 35 ft lbs. step 2 an additional 130 degrees step 3. 4 center bolts an additional 30 ...

... Step three. tighten the 4 center bolts an additional 30 degrees. Should you need further help please just ask. Please rate the answer. This way I know it was helpful. Thank You for using Fix Ya. ...

...center. You can loosen those by hand or a flat head screwdriver if tight. Once all clips are removed, fold the carpet edge over and located the round screws protruding from frame. Remove those (there ...

...center bolts to 25 ft-lbs, torque the 4 corner bolts to 25 ft-lbs 2. Torque all center bolts to 50 ft-lbs, torque the 4 corner bolts to 50 ft-lbs 3. Re-Torque all center bolts to 50 ft-lbs, re-torque ...

Question about Buick LeSabre

1 Answer

...center bolts to 25 ft-lbs, torque the 4 corner bolts to 25 ft-lbs 2. Torque all center bolts to 50 ft-lbs, torque the 4 corner bolts to 50 ft-lbs 3. Re-Torque all center bolts to 50 ft-lbs, re-torque ...

Question about Buick LeSabre

1 Answer

...4: Now, starting near the center of the head, loosen a single head bolt about 2 turns. Now, torque it down to about 15 (+/- 3 lbs) IF A LONG BOLT. OR 11 (+/- 3 lbs) IF A SHORT BOLT. Step 5: After all ...

4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm). Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm). Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm). Step 3: Tighten each bolt to 49 ft. lbs

Exhuast manifold torque 38 foot pounds, Head bolts are 38 Foot pounds after you add sealant to the bolts then after torque go another 130 degrees. Tighten center 4 bolts in sequence another 30 degrees

Not finding what you are looking for?
1994 Buick LeSabre Logo

1,321 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

1992 Buick LeSabre
1992 Buick LeSabre

779 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...