1989 Buick LeSabre "relay starter" Questions

...starter relay) If you remove the starter switch lead (small wire) from the starter relay and apply +12v from the battery to its respective prong or lead on the relay, and your starter cranks, your ...

...starter relay,Use the starter relay as a tool only,till you wire the vehicle correctly,in the engine junction fuse box is a relays,from those relay is a starter relay,open the cover and access the ...

...starter relay on 1996 Buick LeSabre? Where is the starter relay? Is the starter relay separate from the fuse box location? What should the relay look like? Is it a square box? I don't know what I'm ...

...starter relay. Anyone of those could be it. If it clicks and the battery is good than usually the starter is bad. If you know the battery is good take out the starter and have it tested. If it is bad ...

starter relay where is my starter relay switch Your starter relay is on the starter itself. I THINK the starter is located on the left side of the engine. Which would be while standing directly in ...

do I find the location of the starter relay on 1998 Buick Lesabre Remvoved all dash covers You may not have a starter relay as such. The Starter usually has a solenoid (a relay of sorts) mounted on it

...Starter Relay Faulty Starter Starter Relay 11 Inspect Fuel Pump Relay Faulty Fuel Pump Relay. 12 Inspect Fuel Injector Pressure Regulator Faulty Fuel Injector Pressure Regulator. 13 Inspect Ignition ...

...relay for starter i have the lights on dASH GO DIM WHEN TRYING TO START i get nothing need to no were the relay switch is and what it looks like I would be looking at the starter and the starter ...

...starter relay on the fire wall there is 8 relays there wondering if that could be a problem Listen to the clicking. If it comes from the starter solenoid (on the starter), then relay is not the ...

...starter relay. 3. Make sure you have voltage going to the start side (small wire) of the relay with the key in the "start" position. 4. If you don't have voltage going to the start side of the relay ...