1989 Oldsmobile Cutlass Ciera "remove starter" Questions

...remove 2 cables at starter -small wire is trigger,large cable is bateery power remove 2 -15mm bolts holding starter. wear safety glasses and reverse procedure for installation. re-connect battery ...

...Remove the starter mounting bolts and any bracket that may be attached to the starter and it will come right out. The starter is located on the front, of the engine block, mounted at the rear on the ...

starter remove exhaust manifold and other related items in way of starter. Question is how do you get exhaust manifold off without disconnecting front motor mount? {2} bolts that hold a portion of the

...starter, into the block. Actually, I had to remove the filter, filter guard, flywheel inspection covers, electric fan, and one sensor connector. Then, it was a breeze! This is for 3.1 vin T, so check ...

...starter is located in front at the rear of engine and goes into the transmission bell housing, remove and mark the wires for future installation reference, unbolt the stater from the engine and drop ...

...with something fairly'soft' (like a piece of 2 x 4 wood... or a plastic flashlight like I did) Using this process it took me about 15 minutes to remove my son's starter, and about 20 to re-install

...starter Remove starter mounting bolts Remove starter. You can go to many auto parts stores these days and borrow the tools you need. good luck. There are two bolts that hold your starter in. ...

...bolts to remove the starter? On the starter.....cant miss them they will be latched on to tge side of the engine. Especially in that car. It might be a little tough u might have to remove some ...

...should pull straight out if there is nothing in the way, if something is in the way it will have to removed first.......hope this ...

...starter in the 1991 Olds Cutlass Cierra I had to do mine recently. You have to remove the radiator to make elbow room. Then jack up the car, as the trick is to remove the motor mount,  then jack ...