...bolts the torque specs. are 22 to 29 for the long bolts and 96 to132 for short bolts and 108 to 132 ft lb for the pulley bolts. i have a 1996 olds sedan,cant find bolts for power steering pump to ...
...enough to take the pressure off the mount . Un bolt the old one , put the new one in bolt it an torque it to
...traces of the old gasket material or it may leak. Installation is the reverse of removal. The gasket will only fit one way, and be careful not to over torque the bolts, as they can be easy to
...the oil pan. To replace the intake gasket does require some special wrenches. Such as a inch pound torque wrench and a torques socket for a special headed bolt. Should you need further help please ...
...seal. A stripped thread can often still be backed out, that's no guarantee. Try for a tightening torque of about 15-20 ft-lb and if you get to that it isn't stripped. Don't worry if it IS
...in the car, you will need a srearing wheel puller,U-shaped lockplate compressing tool , set of torques ( star bit looking things ) and some time. keep taking every thing out and clear in the
...bolts. Torque: 30 Nm (22 ft-lbs). In sequence, torque all bolts. Torque: 50 Nm (37 ft-lbs) In sequence, turn each bolt an additional 90 degrees. Originally Posted by norvelplagbao52 1993 saturn sl2 ...
...Bolts Torque sequence --------- ' 6 2 3 7 ' ' 5 1 4 8 ' --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees recheck final torque in sequence *** CAUTION ***engine ...
...LBS. SECOND PASS TORQUE CYLINDER BOLTS 59 FT LBS. IF YOU HAVE 17MM HEAD BOLTS TORQUE TO 70 FT LBS.THE THIRD PASS TIGHTEN ALL CYLINDER BOLTS ADDITIONAL 90 DEGREES. ROD BEARING BOLT TORQUE TO 35 FT
...bolts, a long bolt and a short one . The torque on the long one is 46ft./lbs. and an additional 90 degrees . The short one is 43ft./lbs. and an additional 90 degrees . Looking at the head from the ...
260 questions posted
Usually answered in minutes!
14 Questions
256 Questions
248 Questions
219 Questions
185 Questions