engine stalls will stall comming to stop then when i restart engine the engine rpms rev up then come back down and sometimes it will stall again.it will ocassionally cut out at hiway speeds.the car ...
...check your evap solenoid or canister. As for the wet plugs, sounds like you have a misfiring cylinder. Check your plug wires/coils and ignition system. head gasket/engine ...
...do the engine control system test for the poss stored trouble code, go to the link for that procedure. ...
How to check engine light codes on a 1989 Old Regency without a OBD scan tool? Hi, This website might be of use to you: http://www.engine-light-help.com/oldsmobile-check-engine-light.html Good luck!
engine light is on for 1985 olds cutlass supreme. Engine light is on for 1985 olds cutlass supreme v6. When weather is hot I get a cutting out of ignition during normal driving. I replaced coil but ...
...engine sounds like it is flooding on start up when it is hot and has been sitting for thirty minutes to an hour. Type: OBD PO171 That is how you look up codes Won't be flooding it is fuel injected ...
Check Engine Light On Car missses intermittently at arounds 60-65 mph. Check Engine Light has gone off, but comes back on after 15 miles or so. Heelllpppp!!!!! You will have to get the computer code ...
how to resetcneck engine light Depending on your model you will either need OBD 1 or obd2 scanner to clear engine code
...but is still on the OBD1 system. How can i check the code? Without a scan tool bridge the pins,turn key to on,not start and count the 'service engine soon' blinks to retrieve the codes.Good
check engine light code says MAF sensor car is stalling, replaced MAF still stalling and hesitant, engine light is still on & code keeps reading the same, any idea as to what could cause this?! Could ...
196 questions posted
Usually answered in minutes!
97 Questions
60 Questions
103 Questions
72 Questions
64 Questions