1991 Oldsmobile Ninety Eight Regency "cam sensor" Questions

Ad

Question about Oldsmobile Regency

1 Answer

cam sensor circut replaced cam sensor still dies could it be the crank sensor? thank you Michael Dale cam sensor is only half of the cam circuit, the other half of the cam circuit is the magnet on the

Ad

cam sensor causing the check engine light to be on and that a part of the cam sensor assembly inside the engine have broken off and have fallen down into the oil pan. he said that to fix this he would

Ad

Question about Oldsmobile Regency

1 Answer

...sensor out of a 1990 oldsmobile regency Un bolt it pull it out. Most likely it will be a bad magnet on the cam sprocket. Over time they will fall apart. The timing cover will need to come off to ...

Question about Oldsmobile Regency

1 Answer

...cam sensor and crank sensor check the timing marks twice and make sure crank is on top dead center. if all that checks out ok i would check power to the coil(s) and the coils them selves... Also is ...

...code 41, How do I fix it? It says no electronic spark or ESC short or grounded. Already replaced cam and knock sensors. Says voltage low. Replace your ignition module under your coil

Question about Oldsmobile Regency

1 Answer

...sensor 5 months ago and still have the problem had it put on a dignostic test and it came up crankshaft senor error.. could it be both the crankshaft and the cam senor does it even have a cam in the ...

Question about Oldsmobile Regency

1 Answer

...cam sensor was bad or magnet missing the this this should cause the light to remain on shouldn't it? Sounds like damage to a magnet. Check out this message exchange: ...

Question about Oldsmobile Regency

1 Answer

...cam sensor. Said it is telling ECM that the engine is out of time and shuts off the fuel. His mechanic friend said its a common problem. When I called O'Rielly auto parts store, the guy said he's ...

Question about Oldsmobile Regency

1 Answer

My 1992 Ninety Eight Regency Oldsmobile was running fine. I parked the car and when I came back to start it 30 minutes later, it wouldn't start. I had to have the car towed. It is in the second garage

...cam sensor were fused together. Exposed wires everywhere within. Can this fry my ECM aka computer? its possible. to know it will have to be checked out from the crank and cam sensors and ignition ...

Not finding what you are looking for?
Cars & Trucks Logo

196 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...