1988 Oldsmobile Regency "driver side hood latch broken" Questions

...driver side ,its easier if you apply pressure down on the hood as you do this, did you have some one push down on the hood when you tried pulling broken cable,might work if the pressure is

...driver's side near the windshield while someone pulls latch. no luck? You can crawl under front with a screwdriver and reach up and try to release the latch manually. push the little lever the ...

...bottom with the screwdriver. Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken

...hood release located inside the vehicle on the drivers side. If the inside latch is not broken have someone push down very hard on the hood while you pull on the hood release. If the inside latch is ...

driver side hood won't open on 1993 corvette The hood releases on the passenger side, but not on the drivers side.Doesn't feel like the cable is broken.Thanks the cable is probably stretched out and ...

...lower left panel on driver side.look under lower left dash panel look for cable that should connects to hood latch.the hood latch could be broken or missing reason why you cant see

...side of the hood latch where the cable enters. You can remove the cable holding bolt if applicable and pull the cable there. If all that fails you will have to remove teh latch by removing the 2 ...

...bottom with the screwdriver. Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken

...the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable. Please do rate my response.

...the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and replace the safety release mechanism broken cable. Please do rate my response.