Question about Oldsmobile Cutlass Ciera
...bad ECM from the junkyard? I just dont know. Ignition control module tested good also. Have you checked the Cam sensor? The Cam sensor controls the injector pulse. probrably injectors not firing ...
Question about Oldsmobile Cutlass Ciera
...If you have a BAd CAMSHAFT sensor you will not get injector pulse, replace sensor and that should solve your problem. Good Luck and thanks for using FIX YA NO INJECTOR PULSE. EVERYTHING BUT ...
...injector pulse Hi Fred: I;d be checking the cps. NO START,NO INJECTOR PULSE Thanks Paul Danner ... ? 10:38 https://www.youtube.com/watch?v=apCuVMsS73U Nov 4, 2012 - Uploaded by elpanin91 ... I fixed ...
...pulse width to the injectors , BUT , there is a injector coil fuse , its #2 in your kick panel fuse box , a 20 amp , check it , sure hope that fix ya . that would be sweet . J5 you need a camshaft ...
...fix for no injector pulse, cam signal, and no start no start condition due to no injector pulse. Also not showing a camshaft positon signal on scan tool Have you checked to make sure the security ...
Question about Oldsmobile Cutlass Ciera
...pulse is good then injector is bad replace and that should solve your problem. Good luck and contact if you need more help. Thanks for using FIX YA I would first change the spark plugs and then the ...
...When the computer internally grounds the individual injectors, the injector will pulse, or spray fuel out into the cylinder. When the injector circuit malfunctions, no pulse, and you get the
...pulse.I do have specified fuel pressure..Any help would greatly be appeciated... This sounds like a main relay problem here is a diagram its located under the dash under steering column its the ...
...pulse come from. I think the ecm. They tested by disconnecting the wire to the injector and inserted a light. All the cylinders lit the light fine except 1 and 3. What do think the problem is and can ...
Question about Oldsmobile Cutlass Ciera
...pulse. No info from crank/cam sensor is common issue, Bad EFI fuse or relay can do this. Bad ECU ground or other ground (Fuel rail) can do this. Many sensors can be tested with ohm meter. The ECM ...
266 questions posted
Usually answered in minutes!
575 Questions
540 Questions
492 Questions
476 Questions
412 Questions