...turn signal THE TURNING SIGNAL FOR MY 2009 CHEVY COBALT IS NOT WORKING. I AM GETTING A REALLY FAST CLICK HAPPENING INSIDE THE CAR. BUT OUTSIDE, THE BACK SIGNAL IS WORKING PERFECTLY WHILE THE FRONT ...
Question about Chevrolet Cobalt
...FRONT AND BACK LEFT TURN SIGNALS DO NOT WORK? WHAT IS PROBLEM BOTH FRONT AND BACK LEFT TURN SIGNAL NOT WORKING BUT ALL OTHER LITES ARE FINE, SIGNAL IS BLINKING FAST check your fuse and flasher if it ...
Question about Chevrolet Cobalt
...Front flashers and turn signals come on, do not flash..help Do you know anything about automotive electronic's ? BCM - body control modules ? DTC'S - diagnostic trouble codes ? Turn Signal Lamps The ...
Question about Chevrolet Cobalt
...FRONT AND BACK LEFT TURN SIGNALS DO NOT WORK? WHAT IS PROBLEM ALL OTHER LIGHTS WORK AND SIGNAL IS BLINKING FAST BUT BOTH FRONT AND BACK LEFT TURN SIGNALS DO NOT WORK, BUT ALL OTHER LIGHTS DO Have you ...
front turn signal does not blink when turned on. bulb lights when lights are turned on. Have you checked the rear turn signal on the same side? Usually when one (1) turn signal stops blinking another ...
...front passenger turn bulb just stays lit but doesn't flash! On occassion, the hazard lights will not turn off while the car is running and just flashes. Is the flasher broken inside the hazard ...
...front or back. Turn on the turn signal and check that the front and back turn signal lights are working. If one is not blinking, replace the bulb. This should solve your problem. Good Luck. If the ...
front turn signal lense on a 1993 pontiac grand am how do I go about changing the front turn signal lense. Hi Dan, If your after the bulbs,The front turn signals are only reachable from underneath the
front turn signal bulb was out as it is not "blinking" and the signal is sped up. But when I looked at it with the lights on the bulb is lit. Should I still replace the bulb to solve my problem? I don
...front turn signal isn't working. Since you replaced the Right front turn signal bulb, your problem lies in the bulb socket or the wiring to the socket. (1) try cleaning out the socket - ...
1,243 questions posted
Usually answered in minutes!
1,428 Questions
485 Questions
212 Questions
74 Questions
42 Questions