2000 Chevrolet Tahoe "front end brake" Questions

Ad

Question about Chevrolet Tahoe

3 Answers

...front hoses at the calipre make sure the brass washers are on the bolt there will be 2 one on each side of the hose end. Check all conections that they are tight and the metal lines that there are no ...

Ad

...front end maybe thr tire.. not sure.. could still be a bad belt,may need thighting, also could be the warning sensor on the front brake pads, that tells you frt brakes are low. good luck, hope this ...

Ad

front end alignment can affect how the car shifts in and out of 4 wheel drive... are your front end parts worn out? (usually happens with worn out ball joints) I got mine out by compleatly lifting the

...front end on a 2000 chevy tahoe? This sounds like a normal pad indicator on the brake pad telling you the brakes need replacing...It could possibly be a gravel trapped between vacuum plate and ...

front wheel is rattling. Abs is engaging when I touch the brake pedel. What should I do? look at that wheel as the metal ring thing that makes the ABS work has come loose on the end of the drive shaft

Question about Chevrolet Tahoe

2 Answers

...front hub assembly and on the rear end, they are also sometimes called speed sensors it could be too mooch pressure in lines if the mechanic used a c clamp to compress the pistons on the caliper when ...

Question about Chevrolet Tahoe

1 Answer

...front end is making scratchy noise? the faster the speed the louder the sound If the sound disappears while applying the brakes, it is very likely the wear tabs on your brake pads. The pads may have ...

2002 chevy tahoe no front brakes only rear brakes I have a 2002 tahoe intial problem was severe vibration in dash and steering wheel when brakes applied,checked rotors,changed front disc,bleed brakes

...front end that goes away when i turn right, I am thinking it is either the cv joint or power sterring pump Don't forget to check the wheel bearing...same symptoms...also have you serviced your front ...

...end of the hose is secure in the bottom of the container. -Open the bleeder valve, ho around to the driver side and pump the brake pedal (slowly or you'll make a mess under the hood), about three ...

Not finding what you are looking for?
2000 Chevrolet Tahoe Logo

536 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...