2000 Chevrolet Silverado "ball joint" Questions

Ad

Question about Chevrolet Silverado

2 Answers

...ball joint 2003 silverado 1500 Does the whole upper arm need to be replaced with the ball joint or am i able to replace the ball joint itself? what are the steps to do ? The ball joints on both 2wd ...

Ad

Question about Chevrolet Silverado

1 Answer

...ball joint.If you put a jack stand under the control arm near the ball joint,take a good size hammer and hit the ball joint stud hard,and drive it threw.Remove the snap ring first.If I can help ...

Ad

Question about Chevrolet Silverado

1 Answer

...ball joint have to be press out.you have to take out the upper control to have it press out.lower ball joint you drill 1/8 hole in rivet about 1/4 deep . then take1/2 bit drill just enough to remove ...

...ball joint moving and so i have changed the joint new disk and shoes and new shocks for the front put it back together test drove heard a noise found the tie rod was bad so i'm wondering what is or ...

Question about Chevrolet Silverado

1 Answer

...ball joint 2005 chevy silverado this can be done with a press, however most dealers wont sell upper balljoint they recomend replacing the a-arm its self. most time you can pick up the complete a-arms ...

...much would it cost to take it to the mechanic to replace the ball joints a ball joint kit of four usually run around $500 - $600. plus $350- 500 for labor. You should try it yourself its not to ...

Question about Chevrolet Silverado

1 Answer

...ball joint loose just take the nut off apply some upwards pressure and hit spindle with hammer and it will allow you to move the hub and all out enough to remove axle. the upper ball joint nut has to ...

Question about Chevrolet Silverado

1 Answer

ball joint was busted and was wondering if that is rubbing and popping from there It is possible that the ball joint is bad, to check you can jack the wheel up 1/2 off the pavement and use a tire iron

...ball joint is in place, i used the jack to bring up the control arm again to line it up with the spindle to put the front suspension together again. Thank you for using Fixya and be safe. place a ...

Question about Chevrolet Silverado

1 Answer

replacing ball joints 2004 in 2004 z-71 replacing ball joints 2004 in 2004 z-71 You'll need to seperate the control arm from the wheel hub. If the ball joints are installed with rivots, you'll need to

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

1,592 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...