1988 Buick LeSabre "diagnostic port" Questions

...port was clogged. Now you know that codes do not always mean to replace something. They just help in the diagnostic process. If your going to work on you own vehicle for the purpose of saving money, ...

...diagnostic port. Most auto parts stores will scan for codes for free, but I'm not sure if they use a scanner sophisticated enough to display ABS fault info. Use this link for more information: Wheel ...

...diagnostic tool to hook into the OBD port. I know that some Cadillacs with Driver Information Centers have the ability to read codes from the computer, and was wondering if something similar was ...

diagnostic port however there are only a few wires going to it,on the top of the port there are two wires side to side take a peace of wire and make a jumper, jump the two wires that are side to side.

diagnostic port usually found under the dash close to the steering column.  Advance, Auto Zone, even Harbor Freight Tools sells them for about $50 and they let you reset the check engine light. &

Diagnostic Link). I will check it in the morning, and I believe if it is not the fuse, the OBD2 port was damaged and I will need to replace it. Still nothing on the trunk release button. What pins did

...diagnostic computer hooked into the port when the engine dies; no trouble code will ever come up. After I had the Crank position sensor replaced...8 months later the problem started over again..the ...

...diagnostic port, about 3 inches long and thin. pull this plate out. (it may take some doing. wiggle it with a pair of needle nose pliers til it comes out) you will see it looks like multiple blade ...

...port under the dash behind the panels,mine is directly above the center hump dead center of the car facing down,you might have to get on the floor to se it but once you find it you cant miss it.The ...

diagnostic port under the dash on drivers side? If you have not tested for fault codes here is a link to how it is done, the codes are read through the engine light blink method. FAQ How to read older