1999 Oldsmobile Alero "abs brakes" Questions

Ad

Question about Oldsmobile Alero

2 Answers

...ABS include: Anti-lock brake control module (2B373). Hydraulic anti-lock actuator assembly. Hydraulic anti-lock actuator motor relay, located in the hydraulic anti-lock actuator assembly. Hydraulic ...

Ad

...right as I thought that might be the problem) I'm at a loss... maybe proportioning valve problem? ABS and Trac off Amber lights are on. ABS LIGHT ON COULD BE A BAD WHEEL SENSOR CAUSING ABS UNIT

Ad

abs the brakes convert to conventional meaning the brakes will lock up if stompped on but still regular brakes ---check the wiring and connections on the sensors also check the hubs/wheel bearing this

...ABS BRAKES AND TRACTION CONTROL CODE SCAN.YOUR ABS BRAKE SYSTEM WILL COME ON ADJUSTING BRAKE PRESSURE TO AVOID A SKID.THAT WHY LOW TRAC LIGHT COMES ON. MOST OF THE TIME WHEN YOU SEE LOW TRAC LIGHT ...

...abs brakes if abs light turn off in 3 seconds. then starting bleeding from master bleed the lower brake line fitting at the proportional valve followed by the upper brake line fitting. keep eye on ...

my abs light and my red parking light is on steady what kind of problem do i have Hello treedy22. Your car has a switch inside the brake master cylinder reservoir that will activate when the fluid ...

Question about Oldsmobile Alero

1 Answer

...brakes and a caliper and fixed my brake lines but my abs light is on but it sounds like a airplain when u drive their is no shaking or grinding in the front end , but i just ordered two new front ...

Question about Oldsmobile Alero

1 Answer

...brakes wont bleed ABS BRAKE SYSTEM NEED A TECH 2 SCANNER TO RETURN MOTOR REHOME FUNCTION. MEANING PISTONS IN THE ABS HYDRALIC MODULATOR SHOULD BE IN THE RETURN TO UPPER MOST POSITION. BEFORE YOU CAN ...

...ABS system to help purge any air in that system. And or how do I diagnose the issue further. Tim Have someone pump the brakes till they can't pump, hold pedal in and bleed them. Repeat over and over ...

Question about Oldsmobile Alero

2 Answers

ABS harness on the hub bearing I belive it is 6 oclock 8 remove the bearing maybe corroded in knuckle hit the flange with a hammer till the hub bearing assembly seperates from the knuckle then pull it

Not finding what you are looking for?
1999 Oldsmobile Alero Logo

1,892 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...