1996 Oldsmobile Cutlass Ciera "low gas extreme cold car" Questions

gas bound by exhaust gases. A simple intake leak would just make you loose fluid, but wouldn't cause the other symptoms until the coolant was very low. Which leads me to, is the coolant full? The head

...gas. After it turns over several time it will finaly start. Make sure you use synthetic oil with a low viscosity,and if you do not have a garage, get a block heater to prevent these dry starts that ...

...low on gas when I parked it in extremely cold temps. The next day when I started it, it died right away and wont start again. Spark plugs have been changed, fuel and additive have been put in, I just ...

...GAS, THEN THE OIL PUMP IS GETTING WEAK.. HOPE I CAN HELP KEITH.. oil pressure issues....when the car is cold...oil is thicker...making better oil pressure....then when the engine warms up...it thins ...

...gas in the low pressure system inlet by depressing the valve --and check and see if the central core of the compressor is spinning or not Did I get the order of the diagnostics right ? where is the ...

...low on fuel before snow, filled up on Monday, car ran fine until Wednesday. It has been extremely cold here. Could it be water in the gas tank or maybe the EGR Valve. No check engine lights nor any ...

...low and if i just tap the gas it will "sput out" someone help me im 18 i have a job and a girlfriend that wants me to take her out. There are several things that few people know about ...

...low side the pressure was extremely high 80psi+. Why? Is this something i can fix?? Air conditioning systems are always high-pressure systems,simply because the refrigerant used is a gas forced to ...

...gas station filled the tank and added Iso-heat n stopped at Autozone to get the cel code read. Random multiple misfire. Noticed my cat was glowing red hot when I got home. Open to suggestions as to ...

...gas in it after he changed the oil.We put a new massflow sensor in it and found oil in the air intake area. Also, the pcv valve was loose? Any help would be welcome and much appreciated. Thanks ..... ...