1992 Oldsmobile Cutlass Ciera "balancer bolt harmonic" Questions

balancer bolt. Torque bolt to + 56 degrees (104 lb. ft. + 56 degrees). Install inner fender shield. Install tire and wheel assembly. Torque lug nuts to (104 lb. ft.). Lower vehicle. Install serpentine

with no problem. It's the main pulley on the engine. It has a big bolt at the center that holds the pulley onto the crank, that bolt needs to come off. Then the pulley (harmonic balancer) can come off

...balancer bolt are right or left handed? Hi...I believe it is right handed thread. I don't know if you have the following but you might want to check this out: ...

...harmonic balancer puller for this car what size screws do i need im not sure wich size bolts you need but if you go to a parts store that has a balancer in stock they can match up the bolts you need. ...

...bolt keeps the balancer on tight. There should be no wobble or movement at all of the harmonic balancer. Take it off, it may still be alright, but find out why the pulley moves on the crankshaft. ...

...balancer, there are threaded holes that will take a 6 X 1.0 mm bolt. You need these bolts about 3 1/2 inches long. Screw them in through the puller hand tight only. If you screw one of them in to ...

...and gear and was wondering if the bolt for the harmonic balancer is right or left handed thread. and what type of puller do i need to remove the balancer Go to AUTO ZONE or call. they will tell ...

...balancer bolt. Tighten to 200-239 ft. lbs. (270-325 Nm). Install the inner fender shield. Install the tire and wheel assembly. Tighten to 100 ft. lbs. (140 Nm). Lower the vehicle. Install the ...

balancer bolt left handed or right threads? I have seen both in discussions. Secondly, is the sensor for this year one that needs to be adjusted or one that simply bolts into place with no adjustment?

...harmonic balancer off a oldsmoble cutlass cieras without jumping out or time if your just pulling it off to change the front seal. all you need to do is remove the belts off of the accs. then remove ...