1991 Oldsmobile Cutlass Ciera "not turn" Questions

...turn signals do not work.I've changed all bulbs, Checked, changed fuses.turn signals light, but do not blink. under the dash on the driver side there is a round or square sliver box that should say ...

...not turn the car off I drove the car and when I was getting ready to turn it off the ignition key will not turn. I had to take the fuse out to turn the car off. The key is till in the car. I can put ...

Turn signals do not work, but the emergency flashers do I have a 92 Oldsmobile Cutlass Sierra win the turn signal is turned on the light on the dash lights up, but does not flash. Is there any relay ...

have to turn the very bottom one is not turning It will turn when you start the car. It's the crank pulley. Check and make sure that the very bottom one is not the a/c compressor turn a/c on and check

...turn signal is used it does not blink and the bulbs are on until turned off Usually it is a bulb because it takes all 3 or 4 to make the flasher work.  Not all bulbs have to work for the ...

...year it was but change turn flasher not four way flasher it proubly has two one for turn one for 4 way. your lucky because one side flashes so listen for clicking sound and you should feel it

not turn The car was turned off. When trying to start the car again the key will not turn. The steering wheel will not move. On the steering column a line is lined up with the word locked. The rack is

coolant fan not working my coolant fan is not working. only gets hot when im at a drive thru or stop light,other than that its fine. any ideas???? thanks Running hot at idle is a classic sign of a ...

...TURN SIGNAL ONLY, WILL NOT FLASH. lEFT AND RIGHT TURN SIGNAL ONLY, WILL NOT FLASH. LEFT Turn AND BRAKE AND 4WAY FLASERS are ok your flasher is bad. Even though all 4 hazards flash,it is still

...turn signal does not--I have to manually shut it off, which is really annoying. Check all the parking light bulbs and sockets - this is usually a sign that a bulb is out or you have a bad socket ...