1990 Oldsmobile Cutlass Ciera "back" Questions

...pack just put on a new one My sincere apologies for the delayed response. I am personally going back to answer your unanswered questions. I have only been a free contributor to this site for the ...

and 3.3L included below: For the 2.5L In-Line 4-Cylinder: Firing Order: 1-3-4-2 Cylinders: ........(back) 1......2......3.......4 ........(front) Ignition Coil Connections: (back) ...1 ...4 ...2 ...3

...included both below. For the 2.2L In-Line 4-Cylinder: Firing Order: 1-3-4-2 Cylinders: ..........(back)......... |...1....2....3....4...| ........(front) Ignition Coil Connections: ....(back) o

...cutlass cierra with no manual. The driver's seat has an electric switch to raise and lower the seat back, but we cannot figure out how to adjust the passenger's seat. Passenger seats are usually ...

runs great then stops sometimes and takes awhile to start back.replaced coilpack any sugguestion I would take the ignition module and have it checked.Its the plate the coil packs bolt to. Auto Zone or

...out. in the trunk look under the carpet or mat behind the tail lite and unscrew the plastic nuts on back of taillite and remove it from the outside and the lite socket should be on back of it. twist ...

where is the crank sensor located at on a 1996 cutlass ciera 3.1 engine On the back side of the engine (the side facing the windshield) you will have to access it from under the car its about a third ...

...while running charge light staying on just replaced alternater and battery Test Voltage @ the back of alternator, and all grounds to body and engine. If you have 14+ @ back of alternator but 12

...and cyl layout Four cylinder firing order: 1-3-4-2 Cylinder #1 is in the front and #4 is in the back. Six-cylinder firing order: 1-6-5-4-3-2 Cylinder #1, 3 and 5 are on the driver side with #1 in ...

back of seat adjustment only lever i find is to move seat forward or backwards but how can i adjust the back of the seat so im not slanted so far back as i am not some rap star haha at the front of ...