2003 Dodge Dakota Club Cab "replace drive belt v6" Questions

...drive about 5 miles or 30 minutes and after heats up it starts to sputter and immediately shuts off. you sit 30 minutes and then it will restart again .have replaced o2 sensor-crankshaft ...

...belt off since it looks to be an autotension based pulley system. Any confirmation or diagrams would be of great help. The tensioner pully is the one that's mounted to an arm, with a square hole to ...

...replace the engine drive belt tensioner bearing on a 2007 Holden Commodore V6? I need to replace the engine drive belt tensioner bearing on a 2007 V6 Holden Commodore, These pulleys can be bought ...

V6 has a belt which must be replaced at 110,000 miles. Why? Ask Honda, they designed the engines. The Honda V6 J Series engine is indeed a timing belt. From1998 to Present the engine has a timing belt

belt, V6 '02 I'm replacing power steering pump, and need to relieve tension on serpintine belt, V6 '02 Sonata. Can't fit 1/2'' breaker bar into slots on belt tensioner, they're too shallow. Is there a

replace drive belt Are you talking about the cam drive belt or the accessory drive serpentine belt? What engine, the 2.0 liter 4-cylinder, or the 2.5 liter V6? If it's the serpentine belt, does it ...

...replace the belt on the driver side of the 3.0 v6 motor. not the serp. belt on the passenger side. cannot locate part @ parts house-any suggestions. want to avoid dealership because of price if ...

...belt can I drive it to the shop without damaging the valves? A 6 cylinder is an interference fit engine . Chances are you bent some valves IF the belt slipped. Mounts usually don't make a vehicle ...

...belt replaced, it broke while driving it.1992 Toyota Camry with 24 valve v6. Is this a valve hit piston engine? yes i am sure it is /u can call NAPA and ask for timming belt and ask them when they ...

...replace the power steering belt on a 1991 nissan v6 truck? You will need to have a 3/8 drive ratchet or breaker bar to place into the idler pulley slot that is rectangular. Apply pressure to the ...