1997 Dodge Intrepid "removing valve cover 2" Questions

...valve cover seals.If you remove the valve cover,you will see big O rings that go around each of the plug holes,Just replace valve cover gasket set and problem should be solved.While you have it ...

...removing or disconnecting the following: NOTE On the LHS or 300M, remove the center bezel prior to the shifter bezel Shifter knob Allen screw Both instrument panel end covers Using a trim stick tool, ...

removing the intake manifold, egr valve and tubing, exhaust manifold on both sides of engine, timing belt removal, valve covers, and a few smaller items. After removing everything on top of the engine

valve and/or pistons could occur. Using a ink or paint marker; mark the exact position of the camshaft sprocket timing mark relative to the two timing marks on the rear timing cover. NOTE: When timing

cover/housing. if you have broken bolts and there should be 2 of them you will have to remove them with a tool called easy outs. and replace the bolts. The thermostat housing on this particular car is

...valve. A band clamp fastens the pump module to the tank. The module rises up from the tank after loosening the clamp. Loosen the band clamp until the pump module rises up from the tank. WARNING The ...

...valve. A band clamp fastens the pump module to the tank. The module rises up from the tank after loosening the clamp. Loosen the band clamp until the pump module rises up from the tank. WARNING The ...

2: bolts 1 through 8: 55 ft. lbs. (75 Nm). Step 3: bolts 1 through 8: 55 ft. lbs. (75 Nm). Step 4: bolts 1 through 8: plus 90 degree turn using a torque angle meter. Step 5: bolts 9 through 11: 21 ft.

...valve covers I found that one of the rocker arms had popped out. I replace the heads with heads from a 2001 Intrepid 2.7. I used the cams, primary and secondary timing chains from the 1999 heads. Not ...

valve cover b/c I noticed a fair amount of oil sludge after changing the oil..... After reading about your problems.... I am wondering if paying for the fuel pump (first) is the way to go....or should