1994 Dodge Caravan "remove sprocket mount" Questions

...remove the camshaft sprocket bolt and washer. Remove the camshaft sprocket. To Install: Install the camshaft sprocket on the camshaft with the retaining bolt and washer. Hold the camshaft sprocket ...

...remove the camshaft sprocket bolt and washer. Remove the camshaft sprocket. To install: Install the camshaft sprocket on the camshaft with the retaining bolt and washer. Hold the camshaft sprocket ...

...Remove the crankshaft sprocket flange. To install: Rotate the crankshaft sprocket until timing mark on crankshaft sprocket is lined up with the oil pump timing mark at 1 o'clock position. Rotate the ...

...remove the crankshaft timing belt sprocket using removal tool No. 6793, or equivalent. Place the tensioner into a soft-jawed vise to compress the tensioner. After compressing the tensioner, insert a ...

A HAYNES OR CHILTON REPAIR MANUAL.YOU GOING TO HAVE TO REMOVE TIMING BELT COVER. REMOVE TIMING BELT AND CAMSHAFT SPROCKETS.THE 3.3L AND 3.8L ENGINES YOU DONT HAVE TO REMOVE MOTOR MOUNT AND TIMING BELT

...sprocket. Remove the oil pump mounting bolts (5), and remove oil pump assembly. Mark mounting bolts for proper installation during reassembly. To install: Clean the oil pump and engine block gasket ...

sprocket. 1. do i have to remove the distributor and if both cam timing marks are ok, where does the distributor have to be (do i have to mark it?) 2. the key questions are - Please explain in detail,

...remove the oil pump pick-up and the O-ring. Take the crankshaft damper out with a good puller. Use a puller to also draw the crankshaft sprocket from the front of the crankshaft. 5. Step 5 Loosen the ...

...sprocket bolts need 75 foot pounds and the timing belt idler pulley bolt 45 foot pounds torque. Step4 Replace the timing belt, using your grease pencil marks as a guide. Finish reconnecting the other ...

...sprocket and remove the left intake and exhaust camshafts. Hold the sprocket and remove the right intake and exhaust camshafts. Remove the crankshaft sprocket. To Install: Install the crankshaft ...