...intake gasket on 1998 olds bravaca 3.8L Engine NOTE The 3.8L (VIN K) non-supercharged engine uses a two-piece intake manifold consisting of an upper air plenum which mounts the throttle body and a ...
...intake (step 1 ) the torque specs for the heads are---1998 through 2001 are 37 foot lbs. ( step 2) rotate an additional 90-degrees (1/4 turn). intake manifold bolts ( lower ) step 1-- 62 in-lbs, step ...
...1998 jeep Cherokee classic straight 6 4.0 liter? I am replacing the head gasket and need to find the lbs of torque. Thank you for any advice, pictures, etc. Torque sequence ------------------ front | ...
...thanks how to find out the torque spec for 1998 buick century 3100engine.i just did a intake gasket switch and i had to loosen the valves to get the gasket out now i need to know what the spec
...intake gasket on my 98 pontiac grand prix supercharged gtp and need to know the torque setting for intake bolts http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280217c80 Try this not ...
...1998 camero v6 3.8l with small amount of oil in radiator do i have an oil cooler All the information I have says NO. Your engine uses plastic intake manifold gaskets that are held in place with very ...
Question about GMC Cars & Trucks
...1998 GMC Jimmy 2whell drive and it is leaking oil out of the intack manafolds builts why If the intake is not properly put into place, oil can leak out of the ends. Use new gaskets, and silicone on ...
...1998 pathfinder is a big job. you have to take out the whole intake manifold, so you can reach the sensor. if you want to do it by yourself \, first you should have ready all the tools and parts.: ...
1998 5.7 chevy. replaced intake gasket, runs rough at idle clears up at 2500 rpms. thanks You could have any number of problems. Sound like a lean mixture problem. Make sure all vacuum lines are ...
1,085 questions posted
Usually answered in minutes!
631 Questions
489 Questions
420 Questions
426 Questions
352 Questions