1996 Buick Century "remove brake light switch" Questions

...brake light switch located and how do I remove it? Hello The break light switch is down under the dash. Follow the brake pedal up and your hand will hit it. Release the tabs and slowly pull the ...

...brake light switck Remove the cover from under the dash and look up above the brake peadle about 5 inches you should be able to see the switch there may be 2 switches if you have cruse contronl. The ...

...brake warning light and buzzer on 93 LaSabre? Brake warning light and buzzer are activated. Releasing brake does not disengage light or buzzer. Brake is not dragging. By removing Fuse #6 I can ...

...remove screws dont pry but gently test kick panel for play it should now slide in towards firewall and dismount its a sensor on brake pedal there is easy adjust ment bolt before it sometimes bolts ...

brake pedal is falling apart this is not the key switch remove any plastic shrouds covering the steering column and follow the steel rod sown the column to the switch that's it replace it and align it

brake, If the lights light up the bulbs are good you my have to remove the bulbs one at a time in the front check your ground wires to the lights if everything is good replace the flasher unit if that

...brake the headlights come on, which is normal, but the odometer light goes very dim almost out completly. Is this a problem that involves the car computer in any way, or is this strickly a matter of ...

...brake lights work, and my hazard lights work, but my running tail lights do not. I still haven't fixed and replaced my head light, so my best guess would be that the circuit for the tail lights runs ...

...brake pedal, or the vehicle speed sensor. I hope this gets you started in the right direction. Some people have reported that after market LED light bulbs interfered with some cruise control units. ...

...brake pedal arm. Remove it and test it by clicking it manually, if it sounds like it is engaging and releasing (clicking) test with multimeter set to OHMs. Test leads on each terminal, meter should ...