...remove the door panel on the rear driver's side door of a 1991 Buick Regal Limited to check the window motor. Removed 3 screws, popped all the plastic holders around edges of door, but there is a ...
...door panel. Remove the inner panel and then replace the pin into the handle. There is a small weak plastic clip that holds the pin in place. If the pin is broken check with your local parts house or ...
...door part. remove the latch. then two torx 10 on the actuator remove them. at this point you will see a pastic rod that is not connected because the boot came off or the actuator is bad. install the ...
...car. i will have to mess with the key to get it to open. this bugs me alot, and i want to know if there is anyways to fix this. note: i already tried to remove the fuse like people have been telling ...
...door handles crancks etc. cover pops off then remove inner cover window up reach in and unpin linkage to old handle .unbolt old and bolt in new one ,Caution not to break fragile plastic clips,Advance ...
...work. This is only true of the driver side door. The front passenger door is fine. need to remove the door panel and check the clips that connect to the locking rods possiblr damaged or ...
...see the problem is by removing the door trim panel. This will allow you to see if is the actuator is moving, and how far, along with noting any interference of lock linkage movement. Hope this
door jams you will have to remove the rubber and pull on the wires individually and one will come into, the splice it back together, sometimes you have to add some wire. You must cut the bad out first
...remove the door panel and push up the glass, I have the panel off but do not know what to do from here. How do I get it up manually until I can get it fixed? Are you sure it's the motor and not a ...
326 questions posted
Usually answered in minutes!
757 Questions
631 Questions
489 Questions
420 Questions
426 Questions
