1990 Buick Regal "lever replace signal turn" Questions

...lever towards the front, you will have the high beam locked. drop the steerring column and make sure the rod to the high beam switch (bottom of column) is moving when u operate the high beam switch, ...

...or the turn signal switch is bad. Jiggle the turn signal lever and that is the only way the brake lights try to work. How do I fix this myself? You replace the turn signal/multifunction

lever under dash i think the third brake light in window and the tail lights may be on different circuits if connections look good to switch check switch or just replace inexpensive part not difficult

signal lever, or multi-function switch. It is extremely common on these cars, and usually mis-diagnosed. Try this before going any farther. Back the vehicle up to a wall, or have a person stand behind

...helps s2g1 With you foot on the brake pedal wiggle the turn signal lever. If the brake lights come on, replace the turn signal switch. my 97 buick regal doesn't have no brake lights what is the ...

What needs to be removed in order to replace the turn signal lever on a 1998 buick regal, I would'nt recommend it it could set off the airbag.

...blinkers dont work check the fuse, lights, wires going to headlights check for a bad flasher relay!! if this does not help much. then replace turn signal lever, the contacts on inside are

turn signals work only when lever is pulled toward you replace internale switch in steering wheel

...lights while wiggling your hazard light button and/or signal lever. When I pulled my hazard button forward, all my lights would come on. Test switch at pedal for power in & out when pedal

lever. If the directionals are not used the car driver fine. If the ignition is turned on and the engine is not started, when you use the directional, you can watch as the computer in teh car "freezes