2002 Mitsubishi Lancer "bend spark plug engine" Questions

Ad

Question about Mitsubishi Lancer

3 Answers

...spark plug and touch it to the valve cover than get someone to turn the engine if it sparks than it is not the problem. Its your timing belt mine did the same exact thing, and what happened was my ...

Ad

...bend the valve stem. The only way to rule these things out is to remove the head or use a "bore scope" and look in the cylinders through the spark plug holes. You could install a new belt and then do ...

Ad

...spark plugs with a new coaxial connector. But my car is still with a rough idling. Please can you help me? Here are the things I would check. -timing belt/pulley alignment -plug wires -coil(s) -clean ...

Question about Mitsubishi Lancer

1 Answer

...spark plug gapper tool available at any auto parts store and get the gap of the spark plugs also the parts store has that info, usuallu .027 Spark Plugs are pre-gapped at the factory but need to be ...

Question about Mitsubishi Lancer

1 Answer

...spark plugs on a 2002 Tahoe with 5.3 engine. Plugs each have a metal sleeve. Can this be removed without damage? it is possible to remove sleeves but if they are stuck on plug you WILL bend them up ...

...spark plug is located under each ignition coil. Prior to removing spark plug, spray compressed air around base ofignition coil at cylinder head. This will help prevent foreign materialfrom entering ...

Question about Mitsubishi Lancer

1 Answer

...will not turnover. The starter kicks in but will not turn the engine over. Remove the spark plugs then turn the engine over to remove the water in the cylinders and hope you didn't bend a

Question about Lincoln Cars & Trucks

1 Answer

spark plug####antifreeze =a leak from the thermostat or intake manifold gasket or thermostat cross over@@@@ no engine specified by you#### oil =valve cover gasket leak #### water = inner fender splash

...engine good spark good spray fuel works for 3 second run, even do it 3 or more times so is fuel dead (injectors? (what ever is there IDK)) to hear engines sounds nice not valves bending (LoL) ...

...Spark Plug they will clamp and stay on the plug. If you're not sure what it should look like, pull off the boot on the plug next to the one you are working on and compare the two. You can use a long ...

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

1,448 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...