2001 Mitsubishi Eclipse "hot cold blend door actuater" Questions

hot and the other is cold, you have a clogged heater core. If both are hot, then the thermostat is working and you've got a blend air door/actuator problem. Actuator failure is pretty common on these.

...side and cold thru passengers side have checked all blend door actuators all are good, starts cold then turns to hot air You have a problem with either the blend door actuator of the door

hot to cold or in between. Avalanche, Sierra And Silverado Remove the floor air outlet duct extension (1) from the floor duct (2). Remove the floor air outlet duct extension (1) from the floor duct (2

cold to hot I see the actuator for the blend door moving but all i keep getting is cold air. I felt the bottom of the heater box and it is hot so there is hot air there. Both heater hoses are hot also

...hot air passenger side blowing cold air I'm having the same problem except on mine it's the driver's side that's blowing cold.  Do you have the pictures in a finer ...

...blend door actuator faulty, or a faulty blend door. This door switches from hot to cold vents. On expeditions equipped with rear AC front and rear AC have seperate actuators. Hopefully this

...cold air and it is 25 degrees outside so this is a problem. The engine is up to temp and I have tried all the settings to get it to put out any type of warm air nothing has worked so far. The most ...

...hot and will not return to cold. It will only return to cold after I do the EATC diagnostic check and the code is either 024 or 025. I hit the blue button so the codes disappear and then hit the Max ...

...cold blows hot !turn to hot blows cold!!! pulled fuse tried reset.?????? most likely needs a LH (bottom) temp actuator. Located in the center of the dash on the bottom, you have to remove the hush ...

...hot air, blower blows but cold air comes what is the problem The blend door is stuck in cold position. That usually happens because the blend door actuator has failed. You will need to test and ...